~
THE JRE EMS SHARPENING BLOCK SYSTEM ~ |
$35.00
Each
|
| This
is the JRE EMS Sharpening Block System. With it you can: Strop your knife edge. Sharpen your knife edge. Maintain your knife edge. Reprofile your knife edge. The EMS works equally well for convex edges, bevel grinds and scandi edges. The block is covered with very dense neoprene to give the proper backing for convex harpening. For other edge types, simply put the required abrasive paper over the leather to form a stiffer backing. The Block has been made with ergonomics, comfort and convenience in mind. The recesses in the sides of the Block make it easy to hold and manuever for long periods of use. More importantly, it keeps fingers and hands away from your razor sharp edges. You can also clamp the Block into your bench vise in the shop for an even quicker edge sharpening session. No need to clamp it to the kitchen table! Changing the abrasives takes seconds, and there are no parts to lose. Simply flip the clamp levers 180 degrees, insert abrasive and close the clamps. For portability, you can clamp multiple abrasives into the clamps and take the whole package with you. Your EMS Sharpening Block System comes with the following: • One Sharpening Block ABRASIVES: |
| For
Reprofiling or if you have a nick in your edge: • One piece of COARSE Emery Cloth • One piece of MEDIUM Emery Cloth • One piece of FINE Emery Cloth For Sharpening and Maintaining your edge: • (2) pieces of 320 Grit Abrasive • (2) pieces of 400 Grit Abrasive • (2) pieces of 600 Grit Abrasive • (2) pieces of 1000 Grit Abrasive • (2) pieces of 1500 Grit Abrasive • (2) pieces of 2000 Grit Abrasive For the Final Strop and Polish: • One piece of Stropping Leather |